BannedCR500Riders.com

more
http://www.youtube.com/watch?v=WR7oBdgazJ


http://www.youtube.com/watch?v=1YjBoHAz ... re=related


http://www.youtube.com/watch?v=YU9rqYx5 ... re=related


http://www.youtube.com/watch?v=CE_jimq5aAU

this is your guys last hope, get it together
http://www.youtube.com/watch?v=4vFVbiZh ... ure=relmfu

http://www.youtube.com/watch?v=mbq--pFYcLw

http://www.youtube.com/watch?v=tjuUWr9v ... re=related

http://www.youtube.com/watch?v=R9LN-CDR ... re=related

CR250 cable exposed length is differnt by about .38"

that would be well within the adjustment range....

CR250 cable housing is 2" longer than a steely cable, 45" vs 43"

then it will probably fit perfect, unless you have quad bars on your bike

heres the top 3 overall for the canadian enduro championship, luckily i convinced tyler murray to check out the trails i cut http://www.worldendurocanada.com/images/Site%20photos/bc11sm.jpg he came 3rd overall, i was somewhere around 30th overall, he probably thought it was going to be a nice and ea...

replace needle and seat, buy a CGM needle to replace the 1368

not great, 9th A class both days

but i had fun, if anyone hasnt done an enduro find one and enter, there a lot of fun and need a completely different strategy

My head just exploded.... XGames is soooooo ghey to not include Trials.... most trials riders dont want to be associated with the monster/ rockstar/ metal mulisha goons that show up to watch freestyle... or Xgames heres more talent than all the olympics guys multiplied together [youtube]http://www....

it sounds like crap cause i totaled the pipe, it has a hole in it and isnt sitting square on the manifold, o and its pretty much squashed flat :cry: https://www.youtube.com/watch?v=O6KJCnujUQk that was day 2 of the CEC, 6 hours of seat time the day before, and 6 hours the second day, needless to say...

i like how the bike is hitting when he leans it over

seat time , conditioning and Boingers do more than EVERY other mod put together, times 10. just finished the first day of the CEC enduro, 100 miles 6 hours , and got to do it all over again tomorrow (but on a blown out course) a revalve and better endurance would put me on the podium.... i like my ...

Dont run too much coolant!! 75% water, 25% coolant works best. that will run the coolest, but in the slow trails i suspect the weak link is the radiators ability to transfer heat to the air.... so you want 60 antifreeze/ 40 water, it will run hotter but it wont boil quite as fast 2.0 bar CV4 cap ma...

Do the jetting numbers transfer straight across from PJ to PWK ?

the only major difference i noticed was the pwk likes a smaller pilot 40-48 usualy

http://www.tootechracing.com/Engine%20torque%20-%20Suspension.htm did some math and figured out that 15/49 has 20% less stiffening of the suspension from chain torque than 13/49 needless to say my next sprocket combo will be geared high, hopefully i can notice a difference did a bunch more math and ...

a strainer and 3" hoseclamp should get you thru..... at least it does in canada

i wouldnt trust a dyno to try and set up real world jetting, simple plug check works everytime

Anyway, I experienced horrible jetting issue. At Low RPM, the engine stopped like if I had no more ignition. if it happens when you open the throttle suddenly from low rpm then its probably too lean on the pilot/AS before messing with anything buy a new needle and seat, 500s wear them out fast (and...

i used to be all about the high revving powerband for everything, but on a 500 for woods you will be much better off leaving it stock, or if anything lowering the ports if you actually ride woods then you need to be able to do a 40-50 mile loop, low revving=good mileage i think the biggest drawback ...

you might be better off not telling the cops cause when the thief shows up dead in a ditch the cops go after you....

i hope you and your friends get your bikes back

I would like a set.....I cant stand the randomly flat tires. They will stay inflated for days/weeks, then sometimes overnight one or both will be flat. air it up, and its good for a while again.....Makes no sense. But, the cost has held me back from it after you get it figured out you dont get the ...

tubliss makes it never slip

not normal.... you must be running service honda jetting

that coulda got scary if it decided to start biting

cool

i got a another set of old (but not trashed yet) malcom smith honda pants.... ill post a pic soon

no headstay and pvc intake tract.... MPS, shoulda seen that one coming

i would be stripping it down and looking real hard for cracks, if it has any hours on it there will be some

id try and keep the 450 airfilter assembly cause its big and less likely to let dirt by
theres lots of kx500af out there, copy