BannedCR500Riders.com

I thought that the suspended oil separates. This is my concern not stabilizing the fuel.

iggys-amsoil wrote:3" drum sander?

That might work, I have a 2.5"

Does anyone know why the holes in the gasket are way smaller than the jacket orifices? Seems like honda is limiting the flow, but why?

I think OEM are steel, they are metal 4 sure

Has anyone got any experience enlarging the OEM gasket to 91mm. I'm not sure how to go about it other than to order a cometic. I've been told cometic has larger ones. I own the OEM that came in the motor kit. I have a once used one that EG modded 4 me. I'm sure lewisclan will tell me to reuse it w/ ...

So Roostius is hooking me up with a plate for the top. I have a hard time believing that I need one for the bottom of the cylinder. Maybe if the case deck was warped it could distort the jug, doubt it and it would prolly suck air anyway. He made extra's in case anyone needs a frisbee.

britincali wrote:

how long is gas with 927 good for?

britincali wrote:Ages.

Ages = ?

a bit more specific please.

britincali wrote:Ages.

I've always kept it in a metal can in the shade. Why waste it.

AlisoBob wrote:

pstoffers wrote: OKaaaaaa

How do you see it?

X2 ?

Bob is that antisieze on the studs of your cylinder?

Does anyone know how long mixed gas with 927 is good for? I've run synthetic forever and that stuff holds up pretty well over time. I'm considering running the new motor on 927. If 927 is so good can one be a bit more aggressive w/ the jetting and run the bleeding edge of the lean side? thanks, sean

thanks for the link bob. I have read it several times thus my concern. Thanks adam that's what I really wanted to know. Now I gotta decide if I'm gonna build one myself with a machineist help or send it to someone. The powerseal folks say they will bore and hone with it if I provide the plate. I got...

the plating is .002 ? so they bore it .005-.006 bigger than the piston then put on the plating to get the .003-.004 clrearance ? I'll have to check but I think the plating is thicker than .002 From a jug that's allready setup they told me they take it down another .008 then build it up and hone for...

My original post was off by one word. "NOT" The nikaseal companies I talked with say it's NOT necessary to use a plate. I don't know if Jay had pete send it over with a torque plate or not. Has anyone ever been able to measure a difference between a bore bores done w/ plates and without? I...

lewisclan wrote:just letting ya know what I did with mine

This is the part I didn't get "contact & bore" ???

I had Pete loomis contact & bore my cyl to the milmum spec before it was sent. milmum just diamond honed it to a finish Huh :?: Both companies told me they bore about .008 out then apply the coating and hone to final size. The point is if they don't hone with the plate then having it bored with...

I'm about to get my bore nikasiled. When I read that they want the jug without the studs I realized that they are not using a torque plate. I'm talking about powerseal usa in PN. Millennium Technologies doesn't use the plates either. Does anyone know where I can buy one? I guess I could have one mad...

Hi I'd like to know the thickness of the bead on a teraflex, IRC M5B, maxxi desert IT. I have a dunlop and a michelin that I measured. Dunlop = .277" = 7 mm michelin S12= .385" = 9.8 mm Target bead thickness is 11mm or thicker to run a nuetec tublis 18" rear setup if you are running a...

lewisclan wrote:

I think this is his lateist mod on his bike

Man I wouldn't wanna be the poor bastard that has to polish that

Hi. Does anyone have input on dimpling the main cases between the tranny and the crank? How about between the case and the jug. I have never sucked a gasket and don't want to. I'm getting ready to throw her back together once I get my crank back from STR. Does anyone use yamabond on the center case....

Is a maxxicross IT the same as a desert IT? I have a maxxicross it that I got with a wheel set up off ebay. The guy claimed it had 2 rides so I bought it, he said the tread was excelent. I get it and there is like a 1/4 inch left. I emailed him about it asking if he did 2 baja 1000's with it. Things...

So is anyone using one for MX? I have yet to try mine. Still snow here.

what is detailer? powerball?

Travis wrote:Looks like you need to stand still while taking those pictures or knock the ice off the lens. Welcome aboard!!

I took them thru a window and I am no photographer.

Some of you guys are dam funny........ The rock here has very little dirt. Your pretty funny too..... Post some photos of your property.... Sounds cool. OK check this one :wink: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1235441606 Am I missing something Bob? What is the Aliso about? Forgot to men...

Hi people. I guess I should intro huh. I've been reading here for a while :? Some of you guys are dam funny. I'm a moto dude that is scared to go big at the moment, getting older and somehow the throttle has come off the lock position. I've got a plan to get my airtime problem worked out though. I b...