BannedCR500Riders.com

Ok I am rebuilding a 1974 Honda Elsinore 250. The motor done is in a box ready to be dropped in to the frame ready to run just add gas and oil, The frame needs some welding at the Y in the lowwer down tube area and TLC and repainting. The fenders need to be repainted new seat cover and foam and new ...

Thanks Roostius_Maximums for the parts bike link but I just need a new seat cover stickers some replacement rubber, cables, odds and ends . lot clean up repaint it and it ready to put back together. This is a fun bike I most will keep it for a little bit then sell it then start anouther bike project...

It not that bad seat seat foam some cables. paint and some TLC it has a new complete motor sitting in a box ready to drop in.

The bike has the stock tires and grips every thing is still stock 1974 stuff.

xtremeslide wrote:This could be a great bike,but will needs a lot of work

Here a couple pictures I pick the new motor thats in a box tomarrow.

the guy who had it has a CZ he now working on.

I now have a 1974 honda elsinore 250.

Anyone have any good web site for this new old school bike I needs some work but not bad.

Will post pictures latter.

I tryed the 4 stroke thing for 8 months on a fully tricked out KTM 560 ported suspension revaled and so on It was a very nice bike but just was not for me i sold it for anouther 2 Stroke. You be back 4 stokes are nice untill they break but the CR500 much funner bike and more of a head turnner than t...

It like beening married selective hearing Ha Ha.

I Know told you so. Ha Ha.

I will admite when I wrong Ha Ha.

Sorry

100hp honda wrote:i think a few people tried to tell you it wouldnt work

Hey I just picked up a 1974 Honda Elsinore 250 for $1500.00

Do you I could sell it for $20000.00 Also Ha Ha.

But I can't tell me wife that she going to want half the money I f I did sell it for that much WOMEN.

I purchased a Aluminm Exhuast Flange with 3 O-Ring set up. Finnaly got around to installing ran the bike with the new high tech Aluminm Exhaust flange for 3 or 4 hour run time on it. It don't leak any Oilly black oil out of But I pulled the pipe just to see how things holding up I got to say is WOW ...

Hey Yota I running a PWK Non Airstricker 38 stock Bored out to 40.1 almost the same 42 Pilot DNG Needle 3Rd clip and 170 Main. I use the same jetting when the carb was Stock bored work great then to. Stock Porting P/C Pipe and Rad Valve (Reed Vavle). Did you get you Jug ported by GSS if so how do yo...

Motoxoutlet thats where I got mine rivet type best chain for the money.

I had one on my last CR it lasted for 9 years and I sold the bike with the same chain on it.

My KTM had a RK I thought it was junk.

DID Rules.

I know Ironman Sprockerts last along time and there good sprockets just saying for the money they cost you can buy new sprockets and chain combo for half the price. You saying you can get 5 years out of a set but how long is you'r chain going to last I could buy every 2.5 years new chain and Steel s...

If you want to fork out the money for Aluminum or a set of Ironman sprokets it all up to you but for the money a set of steel sprockets and a DID X-Ring chain work great for me. I had the Bing Bling sprockets Aluminum steel combo sprockets and a so called RK O-ring chain they claim is better on my K...

I only will use steel ones.

If the sprokets go bad makes you'r chain bad also put new sprokets on with a bad chain you new shiney sprocket are not going to last very long go both way new chain bad sprockets.

Change them in sets.

Steel sprokets are cheep and last much longer than Aluminum ever will.

DUMB ASS

Sorry if there are misspellings and missing spaces. I read back over it but the kids tore the buttons off the laptop and I put them back on but they don't work as good as before. Ha Ha It a pain to type in to this fourm when the kids are around bothering you I get shit all the time about my spellin...

CR500R7 wrote:
WOW, how big is to big.

Why you Scared Ha Ha

Just hold on and pin it.

GSS makes a 720 kit

I don't know much about it but he makes a BIG BIG BORE 720 Kit.

My first mounts had some pr load on them I think thats why they broke My 2nd rear mount I think I had the band Strap tourqe down to tight thats why it broke in half. The front mount was under preload and to thin metal. I hevent broken a pipe mount since I rode a 125 like 6 years ago. if mounted wiho...

Ha HA I broken my rear mount twice so far and front mount once so far I still trying find a mounting system that will last I using a Z angle mount for the front pipe mount made out of 304 Stainless Steel 1/4 hard .125 see how long this last the one before was a Z angle made out on 301 SS .071 1/4 ha...

Wow I thought mine was slow you have the Non Turbo Yugo I don't feel so bad now. k, so i'm back to the regular speed at home here tonite, almost 6 minutes and it hasnt loaded the speedtest site completely here we go, 9.5 minutes to get this https://bannedcr500riders.com/images/auto/3841c0abe20ddf5fc...

So you think you'r is slow check this one out.



Ha Ha about as fast Turbo Yugo

You'r CDI or plusar pickup could be going bad My old KTM did that it drove me nuts trying to track it down once I replaced the CDI and Pulsar coil fix it.

Not to curse you but I hope you'r CR500 motor you used for you'r conversion is not a POS like my motor ended up beening. New cases new trany, new shifter forks, new shifter drum, new bearings, new crank, and topend, New clucth new reed valve at least I have a new motor out of the deal and spending a...

Not me I will respect him as long as he respect you back and no one has the right to look down on you ever. You should not have to kiss his ass just respect each other for who the are and what they have done. No I never flew in space but I have served my country been to war been shot at by missles a...