BannedCR500Riders.com

Yep

I don't like that they end up so wide from face to face that you can't fit an oem bolt in them.
I waterjet generic mounts now for this reason, not aware of anyone still fabricating the shaman style mount. I'm sure there is a drawing file of it here somewhere yet.

those were for gen1 250r chassis.

what year are you building?

I've been making these for a year or more but I'm not good at advertising other than a mention of them on my MRE FB page. https://1drv.ms/i/s!Aunym11ookq9hLYS2-D_2frk9ODfBQ https://onedrive.live.com/embed?cid=BD4AA2685D9BF2E9&resid=BD4AA2685D9BF2E9%2172466&authkey=ABpa2p4JFusQVVE https://one...

I've been making these for a year or more but I'm not good at advertising other than a mention of them on my MRE FB page. https://fykrtg.dm2301.livefilestore.com/y3mESpzAiCBJZMJWN4Okwq0TOTTvzRdQUJ-1CWfM9QPW4rYH53qGOg6VSR7jpui_Z1NzYIUTS8rc7qJ4PBv34qoGKKCXXj33_9PTrG4ki_Sr4Gkpz5H55JvdfwrVeWG4KFD9gvQoTg...

I will have some new ones available again shortly.

Nobody has. I've done them by extending the rails with billet so the Y can be raised. Have a mps frame I'm fixing with my own billet Y, special stuff haha

iMessage heading your way on intake options

Thats a good looking setup!
If trackframe shocks last like my old skidoo mach-1 stuff i had you'll bugger up the best ones as quick as the cheap ones. Just have a spare.

Glad you're here!
I didn't have a tracked bike section yet but I'll add one today, many many customers running them now.



Adam

either way its a bored 39 and the metering block stands up out of the venturi further than intended

The 41 is a molested bore 39, not an option. Airstriker flows higher velocity and the same cfm as a 41 Gnarly is very close to a Fatty with less topend, I'll always choose a fatty, even for singletrack. Coolhead, not worth it. Give me a shot at cutting your head for 85$ Reeds? Add a spacer to your s...

sure is a nice clean install of that 750!
I've seen quite a few up here and down towards Billings MT with some horrifficly plumbed pipes haha

Glad you're here!

13 saws the swingarm

great! glad you're here!

rear brake pedal? no

87-88 fork is awesome
unless you have a 2002 or newer showa which is altered from stock I'd run what you have

can throw a 53 on the back, i don't like a 13t front on those swingarms.

Thanks for the post Matt!
Worried that nobody here was actually burning fuel

Always loved my '88 shock which was luckily in excellent condition. I'd likely advise to run it

Likely. And that rand valve likes a little less pilot too

Stock was the R1370n needle at 4th clip from top
Main 168
Pilot 58
Airscrew 1.5 turns out from bottom


Fmf used to package a jet chart with their fatty that said
175 main
55 pilot
1368 needle and clip at 2

Hard to tell really. The intake side has the ceilings of the aux ports tapered up which I don't like. The angle from the walls to the piston are done well. Exhaust side is sketchy

very backwards combination there. I wouldnt do it

I go .018" on the skinny side for standard setups
bridgeless cylinders i go .022
have run them up to .026 or .028", i forget, made no difference really