BannedCR500Riders.com

Just thought I would give an update!!

I have been fighting this problem for a long time now. I have put a pingle fuel valve on and still the same problem.

The fix, modified fuel cap breather. No more problems.

Thanks guy's

Anyone tell me what changes to 19''wheels between years? Thanks for any help.

Thanks, I was looking at some DNA wheels and I'm sure that the wheels are the later ones that have the bigger axle, bearings and different wheel spacing. I am not sure of the different gens and years. I wish that someone could tell me exactly what I would need to do so I wouldn't have to waste money...

Sorry I know saw this but I searched and cant find again. I wanted to get some new wheels and have seen alot listed for the cr250 with the 19inch rear. What do I need to know about this swap. Spacers bearings or anything else. Thanks for the help..... PS I found some for a good price so I was lookin...

I would really like to know the answer to this? I too have the 94 stuff and cant get it to run with the 500 CDI. I wonder if we used the 94 500 CDI if it would work. I would really like this bike to hit harder at the bottom. I miss my 88 500, lol. coly it might be worth a shot at changing wires , I ...

I like my CPI pipe, I'm not a great rider, but I wanted to feel some of that arm riping power my 88 had.

I know it lost some bottom end but I dont think its bad at all, allready had alot of bottom end, could loose a little. LOL

I see compleatly what your saying thats why I asked what you can get away with on stock porting. I have built many big block chevs and what your saying holds true even on a cam and valve engine. Like dubious 01 Just hoped to get a simple "I had pinging at 175" or "best at stock" ...

What is your thought on max cranking compression for premium on stock ported engine?

My Yamaha Superjet sat for one year full of salt water. Thought for sure the crank was toast Soaked it in MArvel mystery oil for a week Been riding it ever since Engine rebuild in a can :headbang: Thats just plain good luck, I had a customer who took his boat to the west coast and hydrolocked the e...

AlisoBob wrote:

M.F.D.B. wrote:..what is the best oil to put on the pipe?

This has a slight fish odor too...

AlsoBob you kill me !!!! I cant believe the pictures and everything else you find.

Thanks glen, I understand when you build a 4 stroke engine with a high lift long duration cam that at low rpm the engine is less efficiant, but as higher rpm's come the engine becomes more efficiant than the smaller cam engine, thats why it builds more power. I just thought a two stroke engine worke...

Yea RPM, Elevation, Timing, cooling system, and so on.

Glen I would like to ask your opinion on whether one would be better to figure static compressio or dynamic compression to figure what octane to use. Building blowen big block chevs for boats I have found it best to just use static compression, but when doing natural asperation I like to figure dyna...

Glen thanks for the pictures and info.

To find duration with a degree wheel all you need to do is bring the piston to the top of the port, ( piston going down) I like to use a ten thousands feeler gage, the bring the piston down past BDC back up to the top of port. Measure the degrees the piston traveld and you have your duration of open...

Thanks brit

when you going to be at sand mnt ? ill have one of my ktm's down there in a few weeks :D Have you been there lately? the road has all been grated from the turn off to the ranger station to sand mountain and to oasis, it realy sucks. Dont bother cleaning anything beforehand, my truck and trailer was...

The last time I was at sand MT. in UTAH was in 2001 and I was on a 720cc Heavy breathed on CR-500 It had big bore modded crancases to accept the large stroker, modded .the cyl. had similar porting as our new race porting.Hand made cone pipe (BIG) Running on nitro-methane . We were running a 18 padd...

Hey Glen, I have always liked having you here, your opinions come from alot of expieriance. Could you plase tell me what paddle tire would be best with your race port ?, I want to use it on sand mountain UT. I know that everybody has their thoughts, and I have already seen them. Thanks for your help.

I basicaly want to buy a spare cylinder and make it have a cr85 ish powerband and more peak hp I may be wrong, but I think he wants you to tell him what he needs to do, to make it unridable. LOL I feel if you had a 500 that hit that hard you would have no choice but bad fuel mileage. There is no wa...

Ok let me try this !!! will a 01 cr125 rear wheel fit a 01 cr5 ?. What may be differant?. Thanks guy's

Sorry, but I have searched and just cant find what I was looking for. I would lik to buy a extra front and back wheel for my 01 cr5 but not sure what would fit. I wish there was a sticky for this. Hate to beat a dead horse. Thanks for the help.

Thanks, rss396 good info. I wonder what the curve is on the 94 250 ignition?. I know alot of us run the pre digital ones.

I would like to know what band widths everyone has seen. Thanks

I ran my zilla for 11 years on a weisco with no problems, until I leaned it out to much. It still had 158 lbs compression compared to 165 lbs new.