BannedCR500Riders.com

I know this may sound insulting, But: Cardboard Is Your Friend! Seriously, cardboard from a Cornflakes (well, name your poison, about once a year, I go on a "Fruit Loop Sugar Frenzy" :eatdrink: ) pack, is great for doing mock ups. You can cut it to fit in the available space and, make it B...

1: If you have ever cut open a Gen 3 Clamshell..... you would be shocked how thin it is .... :shock: 2 : The Gen 3 is vastly different than any Gen 4 or Gen 5. If you wanted to bolt in the front mounts on the later Gens... I'd say go for it. 3 : On the Gen 3, you really need the stressed member ( a...

No Gregrobo, just open to different ideas. It's what this place Should be about. As scary as that first (I hope) iteration of the mount the bloke showed, it does have merit. My experience with the front plate Gen5 set up, though I Was aware of the differences / advantages it could present, still was...

Right, I'll start with being a Nasty Bastard - if you need crayola drawings, well fuck me, you shouldn't be doing a conversion - even though conversions rank barely above High School Metalwork level engineering. Rip over. So, you can't get any Great triangulation through bolts in the plate. But, as ...

I guess he may have some difficulty suing you between countries - and, I'd say the internet litigation world is in flux. But I have seen people nailed to the wall within the US, especially when it's a business getting into it. Just not wanting to see you done over by the bloke. Again. I've seen so m...

Scooter: Please take this as advice Only. Tone down / back off on the name calling. That's where that 'individual', could "go you" with regards to legal action. What you show of his / their workmanship, is irrefutable - especially as others will / would be able to show his dreadful workman...

All things considered, your welds are not too bad / fairly good. Some sections with low amps / some with too high - you can see where your welding speed / amperage used did not match, notably on the front of Y / Downtube. It looks like it 'got away from you', but you handled that relatively well, pi...

A 'T' shaped mount is just a mount. No one has a design patent on that. That, to me, is no issue at all. Machine what you machine. Though, there is No necessity to machine up a mount. As far as I'm concerned, it's an overly rigid mount that I'd never make or use, as it's being attached to relatively...

Congratulations to your Wife and You.

I'm sure she would agree, better out than in!

The frame is weak.... super weak..... What carries 90% of the load is the engine, as it ties all the pieces of the frame together. EVERY mounting point is critical, as its responsible for its part of the triangulation. Without every mounting point , the frame will fold..... .... dont even think abo...

Yea, some guys run two.... I've seen rimocks in piss poor shape go back in, then the guy complains its still sippin'.... :roll: Duals can be a pain in the ass to get in.... Maybe just try a new one first. http://www.motionpro.com/motorcycle/partno/11-0060/ http://www.motionpro.com/images/enlarged/1...

I'm not sure - I've never used those types, but it looks like far to much, and it's 'projected' quite a distance. It looks like it may be staying on, for too long, and being a Second Exhaust Port. It's like a 'burn' mark, to me, in this picture. Not Effing Good! At the most, I'd expect a tiny bit of...

Hey bearorso, can you post some pictures of the long quiet muffler, both the external and internals? I don't think we have anything like that in the USA, but I could build it if I had a few pics. It is essentially the same as the std late model CR500 muffler. Made by HM, but not 'fancy' in any way....

These are the things I found in mine: One reed petal, replaced by a 1.55mm thick metal plate - not, a metal reed. A washer, tack welded into the header / ex manifold (can't remember which), that has a 17mm center hole/ A throttle restrictor 26.5mm long - giving, I assume, 11.5mm of throttle opening....

It would have to be a complete piece of shit decomp. Are those little Harley type ones a poppet valve unit , or not? By poppet valve, I do mean just like a 4t valve and seat set up. My auto decomps, have a poppet valve that is closed by vacuum. So, whilst the engine is off, the valve is open. When t...

The piston is reciprocating.... A::roll: B: There is no gyro effect.... C: Chain tension ( acceleration / coasting / decelerating) effects suspension reaction. D: C/S position has little , if anything , to do with it. E: Motor clocking will slightly effect the bikes center of gravity, but I doubt i...

Make sure you put My comments up. Here , I can be more forthright: If the fellow that did the work for you, does work in the Aero Industry, I sure would not want to depend on his work keeping me in the air. As I said, it is truly worrying. FUCKING Frightening, in fact. Now to see if this site delive...

the black bikes facebook page shows he has the same screws you and I do, could be the balls :lol: I feel like a women suddeenly.... When you see the spikes on the full on Ice Speedway bikes, you can see how you could become a woman, in an instant Doesn't matter how many times I see Pro / World Cham...

A much cheaper way, off course, is finding some clamps with less offset (you may be able to get a few different offsets, for experimentation), a better front disc and caliper, with a nice 18" alloy rimmed wheel , or, new rims, front and rear.

I've quite liked this little project. It looks like you lifted the subframe / seat tail section up to nicely match the tank, plus get rid of the 'dog with worms dragging it's arse across the carpet', look. Something really important to consider : a Much better front fork / brake package. You should ...

Oops, double post Doofus!

I can only assume you are wanting to use those mounts on the conversion. Fair enough - very nice things. And very strong, if they are in good nick. Unless you're trying to keep the tubes surface untrenched, just cut into the welds fully. So you don't damage the mounts, 'knocking' them off. You can't...

It's what bike you have set up well for yourself. But: Gen 1s - quite widely, regarded as one of the worst frames / bikes ever made, by Any manufacturer. In 97, 4 of my mates, and I, promptly put 500s into the new 250 AF. Within a couple of months we had All gone back to the steel frame. I kept mine...

Bigger sized bolts are really only of use if you have a damaged frame mount - as in, it's flogged out from round. Assuming of course, the manufacturer / designer / builder has not made a very basic stuff up. I'd prefer to machine the frame hole to true circular, then machine a 'top hat' insertable w...

Any tried one on a 500 yet? My favorite riding areas are under threat of well, everything.... Wondering if someone had tried one, while the 500 doesn't have the noise that a 4joke does, it still has a unique bark that seems to travel more than my 250 or 125, even though it's not being ridden as har...