BannedCR500Riders.com

New PWK is the best money you can spend on one of these bikes

Be careful when you get close to 91- my piston was fine but after a couple of years both sides of the cylinder were cracked.

There's a reason Honda only sold up to a 1mm overbore.

Just put some new rings in and run it!

85 gear is metal not plastic

Doing the cradle replacement is easier than it looks- we did one with a harbor freight tubing bender and a hot plate and it looks great.

If you can, upgrade to a modern basket- 85 clutch sucks. That stupid little BB in there doesn't work worth a damn.

I have a 93 ignition and it works really well- not as abrupt as the 85 setup

The 85 ignition has aluminum connectors- I gave up trying to get it to work and upgraded to a 250 ignition

I was 100% satisfied with AZ crankworks. The rebuilt and balanced my crank for a very reasonable price.

http://www.crankworks.com/

IMO if you can rebuild multi-cylinder snowmobile cranks you can rebuild anything.

scored an old fatty off ebay for 50$, will let you know when i try it out

Good to know- i also goop my bolts with enough 'right stuff' that you have to hammer them out when you disassemble the bike.
I think it makes a difference.

Upgrading to the new cover definitely worth it.

Looks good but I am not crazy about your bolt selection though, at least from what I see on the headstay- if that is threads all the way through on you are asking for trouble. Using bolts with a shoulder wide enough to fill the hole (not sure the technical term) is critical to avoid cracking. What b...

electrix stators are junk better off with used oem

Short rod motors love the newer oem pipe

my short rod wouldn't stop pinging the the dgn so I switched to dgj

Race in Gallup this weekend- maybe some of you AZ guys can come out

http://www.nmors.com/

I used a jigsaw to cut a slot in the tubing and used a chisel to get the stuff out of the pocket

Light switch is the great beutifier

Most chrysler owners would rather crash and die than continue driving one of those things

I have been using FLO 3 stage filters myself, they really seem to help

http://pcracingusa.com/store/index.php?cPath=4

we call those bikes with every thingamajig you can buy on them 'tweaker bikes'

remember if you screw it up the first time you can get another frame on ebay cheap- my first conversion sucked but my second is solid

You need a bigger ring gap with high compression too, at least according to vertex manual.