BannedCR500Riders.com

TYSTIX where at in elpaso? im going to cruces for x mas mabe we can hook up for a ride!

Its time to resurect this thread!

He is a good customer of mine!

still have it price drop 4500$

Rue still have 450 500 06 model, and a new yz 450. Im going to build an 05 250 f frame this winter!!

03 cr125 frame converted by ttm. the bike has... oversized front rotor clarke tank magura clutch rekluse e axle devol rad guards rad valve 86 bottom end 87 cylinder cylinder decked and ported spark arrestor x ring chain suspension set up for 240lb woods rider skid plate extra set of forks and shock ...

Those brackets came off an 03 cr125!

Sweet build! looking foward to riding with you soon!

looking for a service honda fmf pipe for my gen 3 125 frame.pm me if you have one to sell!! thanks.

Hey bob , did you tell the landscaper that he was probably not going to get paid?

Thanks yota ill try a wing first!

Thanks 4z that was the answer i was looking for.The pc pipe that i got from mike does not make the most bottom end. I know the fmf will make more and make it more rideable. And i had to deal with mikes bullshit also! :twisted: Its to bad mike jacked up his reputation, ive ben riding my bike for almo...

Does anayone know if fmf makes a pipe that will fit on the ttm 500 gen 3 chassis? And if so where can i purchase one?

Ill probably try a 7 slide since i ride 5000 to 8000ft in the tight trees and high desert. I put a 42 pilot droped the needle all the way down and it seems to run better on the bench but i have not riden it yet.Will take out this afternoon when it warms up.

Thanks great info, going to try a 6 when sudco re opens next week.

Ok i got a 39 pwk off ebay that was on a ktm 125.That carb has a #55 slide and seems to rich from1/8 throttle to 3/4 throttle.48 pilot ,168 main . dgh needle. What number slide are you guys running?

Ive ben riding mine for 10 months now and have a suspension setup that works verry well.pm me with your phone# and we will talk.I operate a race tech suspension center.

The ricky stator brand new cost me 125 plus 8.00 shipping

Oem and ricky stator are good stators , stay away from eletrosport they are chinese junk.

A dual map switch would be nice,only to improve traction in the wet slimy rocks or the tight silty desert.Running a flywheel weight helps me tame down the motor.I would not invest in that ign just for starting purposes.If you cant get a full kick out of it check the kick starter gear first.

Ive got a 86 flywheel if it will fit. It has a weight welded on it. pm me if you are intrested.

The only way to test the box is to swap it out with a known good stator off a running bike. Im not shure what resistance but if you find a honda manual that should have the resistance for the stator. My 2 junk stators checked out good with the restiance but i could not get the bike to start verry we...

I had the same problem starting my bike with the 96 cr 250 ign. The eletrix stators had a lot of issues. I also thought my jetting was off. Replaced the stator with a rickey stator, and now my bike starts 1st kick hot or cold.Also the timing plate on the bottom of the stator where the bottom bolt go...

Right on!! I have an 86 motor in my ttm bike also. The transmission works great for offroad.Sweet bike!!