BannedCR500Riders.com

Thanks for the reply. I found this from trail-tech and liked it because its adjustable. I am going to try it out... https://bannedcr500riders.com/images/auto/9b964c78135bc56d232c2544a1459bf8.jpg Regulator by fmikhele , on Flickr Going to wire it as the E-line manual says... https://bannedcr500riders...

Ok I will let you know... I'm going to attempt to weld it first. Thanks again.

Thanks man! Do you think you could spin me up one of the E-line retaining nuts for the generator if I can't salvage mine?

[url] http://www.bannedcr500riders.com/board/viewtopic.php?t=13183&postdays=0&postorder=asc&start=50 On page 3 I posted some picture of the E-line and the regulator/rectifier which I had from a previous 500 I purchased. It utilized a battery which I dont plan to use. I want to wire it ex...

Sent. Thanks again!

Are these documents still available?

A little more progress... https://bannedcr500riders.com/images/auto/26d17017cb1dfb17ab7c10921bd4da61.jpg IMG00204-20130416-2033 by fmikhele , on Flickr https://bannedcr500riders.com/images/auto/bff6eff172ba5500774532f93a896b67.jpg IMG00205-20130416-2034 by fmikhele , on Flickr Here is the E-line and...

Using Jerc's parts right now for my build -->
http://www.bannedcr500riders.com/board ... hp?t=13183

Recommend his parts 100%

He gives you step by step instructions for the conversion--> http://www.bannedcr500riders.com/board ... hp?t=13204

Progress... https://bannedcr500riders.com/images/auto/962791aea9e8250d50c3c47fc2652bd2.jpg DSC01015 by fmikhele , on Flickr https://bannedcr500riders.com/images/auto/d395cc408c514c7b7747b6e6c2eca1bd.jpg DSC01014 by fmikhele , on Flickr https://bannedcr500riders.com/images/auto/a74355628bafed5a0f67af...

Your head is a little scary looking When was the last time the bottom end was serviced? Might want to dig deeper then just a top end! No lube holes on the forged piston Bob will be on your ass about that... Is the exhaust bridge relieved?

glad to help

Any luck?

The cable sheathing (tube) is essentially a rubber coated spring under tension it stretch's but the cable does not so the "slack" is reduced.. See the figure sorry I'm exhausted so its rough No tension --> slack = total length - spring length (no elongation) Pinched cable i.e "tension...

believe one of two things is happening. (1) The throttle cable is pitched somewhere and your slide is not bottoming out. I would first try loosening all the bolts holding the tank in place but leave the fuel line connected, and ease the tank up a bit and play with the throttle cable slack a little a...

I'm assuming you've had the common sense to try adjusting the idle correct? Does the idle adjustment have any effect at all? In your first video (the engine in the AF) Sounds like it was idling fine and then your either gave it some throttle or turned the choke off (hard to tell from the video) A li...

Sounds dumb, but is the slide bottoming out in the carb i.e when you crank the throttle and left off quick do you hear the slide bottom out in the carb? Possibly check how your throttle cable is routed. Check where the carb cable goes into your throttle and the cable into your carb. Sometimes its th...

Thanks man. I put the order in to motosport already so if it gets back ordered or something I'll msg you.

Np. I am running the 2000-2001 GEN 2 kicker. I like the GEN 3 (2002 and up) kicker alot more but find the bushings in it wear out quickly and it rattles like crazy. Also believe with the gen 3 kicker if you run a FMF pipe it will interfere with the kicker about mid-way down the shaft (Atleast it did...

Parts on order:
OEM reeds
CR250 airboot and cage
CR250 brake pedal
CR5 kicker
head stem bearings.
new plastics
Clarke 3G tank
CRF'X' model tank petcock.
bolts/screws, collets, rubbers for tank etc.

CR250 kicker shares the same spline as the CR500 and fits the frame better!

Done.

NP

Your missing the bracket circled in red (#17)


cr500cylinder by fmikhele, on Flickr

Gen 5 CR500AFX build started on 01.12.2012 Grabbed these quickly tonight.... http://www.ebay.com/itm/251249668598?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 http://www.ebay.com/itm/251249668077?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648 Only need one. PM if interested.

Grabbed these quickly tonight....

http://www.ebay.com/itm/251249668598?s ... 97.l2649 http://www.ebay.com/itm/251249668077?ss ... 1497.l2648

Only need one. PM if interested.