BannedCR500Riders.com

That pipe was on as a mock up. Tire was into it at about 1/2 travel! same as other pipes (PC FMF). I reworked a PC to fit yeaterday. I will post pics later. I had to take about 1 1/8" out of the head pipe, right where it comes out of the exh flange, along with some other reworking. I have been...

:cry: Adam, thanks for your condolences, but I am not getting out of the milling buisness, just doing something that makes my wife nervous, I amgoing for a newer model with tighter tolerances. Old mill https://bannedcr500riders.com/images/auto/7e57d3f328525070ccfecf2db09324f4.jpg New mill https://b...

Bridgeport Series 1 Variable Drive Sony DRO Full set of R8 collets plus holder X axis power feed Single shot lube system 6" Vise 8" Rotary table Misc Tooling Phase converter (Static) $2500 Delivered Phoenix metro Possible deliver to the Lakeside AZ area, maybe to LA area, depending on what...

While the frame was at the welder I worked on cleaning up all the parts that were going back on. I found a small sauce pan with about a pint of mineral spirits to be a good substitute for a parts washer. I use diesel fuel in my large parts washer. Because my wife does not like the smell of diesel fu...

I needed forks anyway and I liked the black KTM's. I probably should have just anodized some cr250 showas. I have one trip on the bike to glamis sand dunes. The forks felt fine to me. Some of you other guys that ride more and in more technical stuff than I could give a more technical ride report. Th...

I am able to walk the fine line and keep membership at both sites. I make sure not to call anything not built by service honda an "AF" on that site :roll: , and I do not say I take off in 5th gear on this site :D . Keeps everone happy. So 100HP why did you get booted over there? Never saw ...

Gazwart...

The man holds a speed record.

quickest banned ever seen on the other site.

you need to make some CR 500 AF "C" stickers for over there.

Thanks for the kind words. A few pics of the radiators https://bannedcr500riders.com/images/auto/50606d76d7336d19d51401ce96a490bb.jpg https://bannedcr500riders.com/images/auto/b9b7c79e4f54a16e9c286242a3c09ba8.jpg https://bannedcr500riders.com/images/auto/6e0215c9617abc9ead366901bf742a7e.jpg

http://cr500riders.com/cgi/yabb/YaBB.pl ... 004574/3#3

Short ones.

GSS makes long hillclimbing

I'm sure Paul can point you in the right dirrection as well.

U2

I loved that fuel but can no longer find it. Any other recomendations?

LMAO

They had honda OEM, but then they stopped. HAd to order KX parts instead. KX500 carb bowl o ring

goes with my theroy spacer more torque, shorten it and higher revs

I may have to go to his one.

The banned sites "Dune Fest"

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150510650000&viewitem=&sspagename=STRK%3AMEWAX%3AIT I bought some grip tape to do the same thing, but saw these and thought their cuts would be better than mine so I got them. I would have been better off to go with the origin...

Welcome. I am just finishing up my 125 conversion. Do it if you just gotta have it. Otherwise, stick to a gen 3 250, IMO

I had Emig bore some tripples to put the WP forks on my 125 convert. I will cover it later in my build.

Ride report form a weekend at glamis. I am satisfied with the way they feel.

So for my 125 build I had to do quite a bit to a PC pipe to get it to fit. The major change is that I had to take 1 1/8" out of the head pipe right where it exits the exhaust flange. The other changes I made were minimal. What are some of the theories on how that will effect the performance? My...

I used 2002 CR250 radiators. I Relocated the two lower cross overs about 3/4" forward. I could have just bent the cross overs a tad to line up with the hole in the wye, but the lower mount would have been overhanging the front of the frame by quite a bit, and I would have had to trim the fender...

you will get 101 opinions.

Mine is Algava style.

http://cr500riders.com/cgi/yabb/YaBB.pl ... 913934/0#0

I did a 125 convert. Major PITA.

Helping a friend with an algava smooth sailing.

That pipe was on as a mock up. Tire was into it at about 1/2 travel! same as other pipes (PC FMF). I reworked a PC to fit yeaterday. I will post pics later. I had to take about 1 1/8" out of the head pipe, right where it comes out of the exh flange, along with some other reworking.

seat, chain, pipe, and kicker are "mocked up"

I have been taking pictures along the way. I will do a better write up later.

If not plated you can use an oxy acetelene torch, I awayas used a cutting torch, get a nice flame get point it into the headpipe and when it starts to burn, you can turn off the acetelene and hit the oxy, that will keep it burning and keep you amused for a while too. makes some cool noises :wink: I...